Motors

Perform this step twice

Screw the wheel onto the motor as shown in step 12. Afterwards screw this assembly onto the motor plate as per step 13. Apply loctite to the screws holding the motor to the motor mount.

Attention

For the second motor, ensure to rotate the motor plate by 90 degrees before mounting.

The wires of both motors need to face backwards after mounting.

Mounting Plates

The motor plates have figure 8 style mounting holes to allow for the left and right motor to use the same plate.

As previously mentioned, they are mounted at a 90 degree rotational offset from each other.

Necessary items

• 2 Motors
• 2 Rear Wheels
• 2 Motor Mounting Plates
• Fasteners (refer to Steps 12 and 13)